The bolt holes of the connecting parts shall be processed according to the relevant regulations. The accuracy of the bolt holes, the surface roughness of the hole wall, the allowable deviation of the hole diameter and the hole distance, etc. shall comply with the current national standard "Code for Construction Quality Acceptance of Steel Structure Engineering" GB50205. Regulation.

Steel structure has been more popular among people, but because the steel structure corrosion problem has been a problem in the industry, the material itself is poor corrosion resistance, heat resistance is not fire-resistant shortcomings, if the project application can not properly handle the steel structure corrosion and fire protection problems, will directly affect the safety and durability of the project. As the steel surface cladding after the steel structure corrosion and fire protection issues.

The main measures to improve the design of steel structures and the main points of installation technology

It is often heard that purlins, C-shaped steel, Z-shaped steel, and CZ-shaped steel are mentioned. In fact, they include C-shaped steel and Z-shaped steel, but both C-shaped steel and Z-shaped steel perform better than traditional steel products in practical applications.

There are no specific requirements for the service life of steel structures in the code, but in the structural design, according to the loaded code, the load statistical value of 50 years as the basic cycle is basically adopted, that is, the probability that the normal design steel structure will be damaged due to excessive load within 50 years is very small.

The installation of the steel structure needs to be hoisted first. Generally speaking, the middle is hoisted first, and then the outer side is hoisted. The principle of first going down and then up is adopted. Fix the middle part first and push through the ends. After being hoisted in place using tools, the anchor bolts are used to fasten them, and then the steel column bolts and pressure plates must be welded before the steel columns can be installed.

Compared with the traditional plant, the new steel structure plant is increasingly used, why abandon the traditional plant and enable the new steel structure plant? Steel layout plant and what advantages?

With the increasing concern and requirements for the quality of building environment, the demand for Shenyang steel structure industrial plant, as one of the infrastructure facilities for the development of modern industry, is constantly refreshing. With the wide application of steel structure industrial plants and the trend of replacing traditional plant buildings, more and more people are more curious about the differences between steel structure industrial plants and traditional reinforced concrete structure industrial plants. Now, Shenyang Steel Structure Editor will introduce to you:

Employees of Shenyang Lanying Colored Steel Co., Ltd, took a group photo in Sanya on 7th January 2023

Introduction of the unique performance of Z-shaped steel structures.